In order to carry out the new standards better, the national non-ferrous metal Standardization Technology Committee and the Shanghai Futures Exchange jointly held a conference on the declaration of the code and barcode logo of non-ferrous metal smelting products and the non-ferrous metal standard working conference in Xinjiang. The conference publicize the two standards of YS/T 1209-2018 "code and bar code for nonferrous metal smelting products" and GB/T 1196-2017 "remelting aluminum ingots". The 46 national standards, trade standards and standards of nonferrous metals shall be examined, previewed and discussed. More than 200 representatives from the national coloured marking Committee and the various sub committee members and the above two standard drafting units, staffing staff and related documents attended the meeting.

In his speech, Ma Cunzhen, the Secretary General of the national non-ferrous metal Standardization Technical Committee, briefly introduced the work focus and the change of the working conference mode of the nonferrous marking Committee this year, and focused on the interpretation of the new revised standard for GB/T 1196-2017 "remelting aluminum ingot". Qian Jin, director Qian Jin of Shanghai quality and Standardization Institute coding center, Pan Jie of Daye non-ferrous metal group Limited by Share Ltd quality center, general manager Li Yichen of Shanghai Hong Kong Logistics metal warehousing Co., Ltd., and Professor Tan Dapeng, a professor of management at Tianjin University of Technology, respectively, from YS/T 1209-2018 "code rules and barcodes of non-ferrous metal smelting products." "Standard" interpretation, enterprise application experience, warehouse application experience, bar code identification standard application presentation several aspects made a wonderful speech. Zhang Yixiu, a senior commissioner for commodities of the Shanghai futures exchange, delivered a speech on behalf of the cooperation unit. The meeting was chaired by the Deputy Secretary General of the national non-ferrous metal Standardization Technology Committee, Zhao Yongshan.

Secretary General Ma Cunzhen said: "remelting aluminum ingots are commonly referred to as" aluminum ingot "," electrolytic aluminum "," original aluminum (primary aluminum ingots ") and so on. GB/T1196-2017 is the revision of GB/T 1196-2008. ISO115-2003, EN576-2003 and AA-2007 are all effective versions of the current revision. Therefore, this revision can still be considered as the main reference to the international standard ISO115-2003, taking into account the standards of countries and organizations with major influence. This revision is carried out in the context of the serious surplus of electrolytic aluminum production in China. In addition to the advanced standards and international standards, the revision process combines the chemical composition, specifications, sales and packaging of the most new aluminum ingot of the major aluminum electrolysis production enterprises, on the basis of the previous versions. The industrial policy of the state related aluminum industry requires that the standard products are classified and standardized, and the grades, specifications, raw aluminum liquid, packaging and other contents have been readjusted. The revised standards are also the main basis of the market economic transactions as well as the needs of the national standards to meet the process of production and sales.

It is understood that the relevant production and trade situation at home and abroad is fully taken into account during the revision, and the revised standard content is more perfect. It is not only compatible with current effective international standards, EU standards and international registration standards, but also is more in line with the current national industrial policy and the actual situation of China's electrolytic aluminum industry. It meets the needs of the development of the electrolytic aluminum industry in China, meets the needs of the market, and meets the international advanced level after the revised standard level. While promoting the improvement of the product quality, it will play a very positive role for the smooth implementation of the 13th Five-Year development plan of non-ferrous metal industry in China, so as to promote the electrolysis of China better. The healthy development of the aluminum industry.

In the interpretation of YS/T 1209-2018 "code rules and barcode identification for non-ferrous metal smelting products", Qian Jin introduced the drafting process and significance of the standard, and detailed the characteristics and application of the standard. According to the introduction, the standard station is at the height of the application of the global non-ferrous metal industry and the management of futures delivery, and fully draws on the existing international standards of coding and identification, and carries out the scientific unique identity of the non-ferrous metal smelting products. Both the smelting enterprise, the warehouse enterprise, the exchange and the downstream terminal users can realize the intercommunication and interconnection of information by means of automatic identification technology through the link of unified coding and identification. All links in the supply chain can be shared by unified coding and identification of the information contained in the product quality, logistics, transportation, storage delivery and so on.

As one of the main drafting units and one of the first pilot units of the coding standard, Daye colored first practiced the application of the coding standard. The evaluation results of the project after one year showed that all the related targets set at the start of the project have reached the standard, and the effect is obviously better than expected in the improvement of the work efficiency and the improvement of the work quality.

Shanghai Hong Kong Logistics metal warehousing Co., Ltd. believes that, with the application of the coding standard, the production downline and loading and shipping of future smelting enterprises; the warehousing and storage of the warehousing enterprises; the inventory inspection of the last period, the fixed management; the process of the downstream terminal users' delivery inspection and revolume reengineering will be comprehensive. Unified coding and identification as a link, automatic identification technology as a means to fully realize the interconnection of information.

The implementation of the new standard is carried out under the guidance of the two depth integration and promotion plan of the raw materials of the Ministry of industry and information, standing on the high level of the application and management of the global non-ferrous metal industry. It will play an important role in promoting the level of industrialization and informatization of nonferrous metals industry, improving product quality and realizing the high quality development of the industry.